Small size, heavy contact load, capable of standing strong current of 45A at 14VDC. PC board mounting.
Suitable for automatic control facilities and automobile application etc.
Both European 11mm pole distance and American 8mm pole distance available.
1 Part number: 4120
2 Contact arrangement: A:1A B:1B C:1C
3 Enclosure: S: Wash tight Z: Flux proof ; O: Unenclosed
4 Contact current: 30:30A 40:40A 45:45A
5 Coil rated voltage(V): DC:6,9,12,18,24
6 Coil power: 1.6:1.6W 1.9:1.9W
7 Terminal distance type: U:USA E:European
| Contact Arrangement | 1A(SPSTNO) 1B(SPSTNC) 1C(SPDT(B-M)) | ||
| Contact Material | AgSnO2 AgNi | ||
| Contact Rating(Resistive) |
1A: 40A,45A/14VDC;1B:30A/14VDC; 1C:NO:40A/14VDC;NC:30A/14VDC;20A/120VAC,15A/28VDC |
||
| Max. Switching Power | 630W 2400VA | ||
| Max. Switching Voltage | 75VDC 277VAC | ||
| Max. Switching Current |
Make:100A(Lamp,Inrush current) Break:60A(Resistive) |
||
| Voltage Drop(Initial) | Typ. 50mV(at 10A) | Item 4.12 of IEC 61810-7 | |
|
Operation Life |
Electrical |
1×105 |
Item 4.30 of IEC 61810-7 |
| Mechanical |
1×107 |
Item 4.31 of IEC 61810-7 | |
CAUTION:
1.For the intermediate current, it only applies to the room temperature.
2.For the open type relays, the min. Switching current and min. Switching voltage is 100mA/6VDC.
| Dash numbers | Coil voltage VDC |
Coil resistance Ω ±10% |
Pick-up voltage VDC(max) (70%of rated voltage ) | Drop-out voltage VDC(min) (10% of rated voltage) | Coil power W | Operate time ms | Release time ms | |
| Rated | Max. | |||||||
|
006-1900 009-1900 |
6 9 |
7.8 11.7 |
19 42.6 |
4.20 6.30 |
0.6 0.9 |
1.9 | ≤5 | ≤3 |
|
012-1600 018-1600 024-1600 |
12 18 24 |
15.6 23.4 31.2 |
90 202.5 360 |
8.40 12.6 16.8 |
1.2 1.8 2.4 |
1.6 | ||
CAUTION:
1.The use of any coil voltage less than the rated coil voltage will compromise the operation of the relay.
2.Pickup and release voltage are for test purposes only and are not to be used as design criteria.
| Insulation Resistance | 100MΩ min (at 500VDC) | Item 4.11 of IEC 61810-7 |
| Dielectric Strength |
|
|
| Between Contacts | 50Hz 500V | Item 4.9 of IEC 61810-7 |
| Between Contact and Coil | 50Hz 750V | Item 4.9 of IEC 61810-7 |
| Shock Resistance | 196m/s² 11ms | Item 4.26 of IEC 61810-7 |
| Vibration Resistance | 10Hz~40Hz Double amplitude 1.27mm | Item 4.28 of IEC 61810-7 |
| Terminals Strength | 10N | Item 4.24 of IEC 61810-7 |
| Ambient Temperature | -40℃ ~ 125℃ | |
| Relative Humidity | 5% to 85% | Item 4.16 of IEC 61810-7 |
| Mass | 19g (Unenclosed) 21g | Item 4.7 of IEC 61810-7 |
CAUTION:
In case of no tolerance shown in outline dimension: outline dimension ≤1mm tolerance should be ±0.2mm outline dimension >1mm and ≤5mm, tolerance should be ±0.3mm; outline dimension >5mm, tolerance should be ±0.4mm.
Address
NO.11, 125 Lane, Qi-Wen Road, Haishu District, Ningbo, Zhejiang, China, 315012
Tel
