Small size and light weight.
Low coil power consumption.
Self-locking motor load can achieve 25A .
PC board relay with high reliability.
Suitable for reflow soldering.
NG8NW relay is with two circuits.
Suitable for home appliance application , motor positive-negative control, wiper and so on.
1 Part number NG8N NG8NW
2 Sensitivity
1:Standard
1S:High sensitivity
1L:High temperature
1H:High temperature /High sensitivity
3 Soldering method NIL: Standard R: Reflow soldering
4 Contact arrangement NG8N:C:1C; NG8NW:2C:2C
5 Coil power 0.64:0.64W 0.80:0.80W
6 Coil rated voltage(V):DC:12
Contact Arrangement | NG8N:1C(SPDT(B-M)) NG8NW:2C (DPDT(B-M) | |||
Contact Material | AgSnO2 | |||
Contact Rating (Resistive) | 25A motor lock (14VDC) | |||
Max. Switching Power | 480W | |||
Max. Switching Voltage | 16VDC | Max. Switching Current :30A | ||
Voltage Drop(Intial) | Typ. 50mV (at 10A) | Item 4.12 of IEC 61810-7 | ||
Operation | Electrical | 1×105 | Item 4.30 of IEC 61810-7 | |
Life | Mechanical | 1×107 | Item 4.31 of IEC 61810-7 |
Model | Coil voltage VDC |
Coil resistance Ω±10% |
Pick-up voltage VDC(max) | Drop-out voltage VDC(min) | Coil power W | Operate time ms | Release time ms | |
Rated | Max. | |||||||
1 | 12 | 16 | 225 | 7.2 | 1.0 | 0.64 | ≤10 | ≤5 |
1S | 12 | 16 | 180 | 6.5 | 1.0 | 0.80 | ||
1L | 12 | 16 | 225 | 7.2 | 1.0 | 0.64 | ||
IH | 12 | 16 | 180 | 6.5 | 1.0 | 0.80 |
CAUTION:
1.The use of any coil voltage less than the rated coil voltage will compromise the operation of the relay.
2.Pickup and release voltage are for test purposes only and are not to be used as design criteria.
Insulation Resistance | 100MΩ min (at 500VDC) | Item 4.11 of IEC 61810-7 |
Dielectric Strength |
|
|
Between Contacts Between | 50Hz 500VAC | Item 4.9 of IEC 61810-7 |
Contact and Coil | 50Hz 500VAC | Item 4.9 of IEC 61810-7 |
Shock Resistance | Functional: 98m/s² | Item 4.26 of IEC 61810-7 |
Destructive:980m/s² | Item 4.26 of IEC 61810-7 | |
Vibration Resistance | 10Hz~500Hz Double amplitude 1.5mm | Item 4.28 of IEC 61810-7 |
Terminals Strength | 5N | Item 4.24 of IEC 61810-7 |
Ambient Temperature | -40℃~105℃ | |
Relative Humidity | 5% to 85% | Item 4.16 of IEC 61810-7 |
Mass | 4.1g 8g(NG8NW) | Item 4.7 of IEC 61810-7 |
CAUTION
In case of no tolerance shown in outline dimension: outline dimension ≤1mm tolerance should be ±0.2mm outline dimension >1mm and ≤5mm, tolerance should be ±0.3mm; outline dimension >5mm, tolerance should be ±0.4mm.