16A Subminiature Power PCB Relay
● 16A switching capability● High sensitivity
● Low height:11mm
● 1 Form A and 1 Form C contact arrangement
● Plastic sealed and flux proofed types available
● RoHS Compliant
Model:NT76
Send Inquiry PDF DownLoad
Product Description
Features
Super light in weight.
High sensitivity.
Switching capacity up to 16A.
PC board mounting.
Ordering Information
1 Part number NT76
2 Contact arrangement A:1A C:1C
3 Enclosure S: Wash tight Z: Flux proof
4 Coil rated voltage(V) DC:5,6,9,12,18,24,48
Contact Data
| Contact Arrangement | 1A(SPSTNO) 1C(SPDT(B-M)) | ||
| Contact Material | AgSnO2 | ||
| Contact Rating(Resistive) |
NO:16A/250VAC, 30VDC; NC:10A/250VAC,30VDC |
||
| Max. Switching Power | 480W 4000VA | ||
| Max. Switching Voltage | 30VDC 277VAC | Max. Switching Current: 15A | |
| Contact Resistance | ≤50mΩ | Item4.12 of IEC61810-7 | |
| Operational Life | Electrical |
1×105 |
Item 4.30 of IEC 61810 -7 |
| Mechanical | 1×107 | Item 4.31 of IEC 61810-7 | |
CAUTION:
1) For the intermediate current, it only applies to the room temperature.
Coil Parameter
| Dash numbers | Coil voltage VDC |
Coil resistance Ω±10% |
Pick-up voltage VDC(max) (75%of rated voltage ) | Drop-out voltage VDC(min) (5% of rated voltage) | Coil power W | Operate time ms | Release time ms | |
| Rated | Max. | |||||||
| 1A | ||||||||
| 005-200 | 5 | 6.5 | 125 | 3.75 | 0.25 | 0.20 | ≤10 | ≤5 |
| 006-200 | 6 | 7.8 | 180 | 4.50 | 0.30 | |||
|
009-200 |
9 |
11.7 |
405 |
6.75 |
0.45 | |||
| 012-200 | 12 | 15.6 | 720 | 9.00 | 0.60 | |||
| 018-200 | 18 | 23.4 | 1620 | 13.5 | 0.90 | |||
| 024-200 | 24 | 31.2 | 2880 | 18.0 | 1.20 | |||
| 1C | ||||||||
| 005-450 | 5 | 6.5 | 56 | 3.75 | 0.25 | 0.45 | ≤10 | ≤5 |
| 006-450 | 6 | 7.8 | 80 | 4.50 | 0.30 | |||
|
009-450 |
9 |
11.7 |
180 |
6.75 |
0.45 | |||
| 012-450 | 12 | 15.6 | 320 | 9.00 | 0.60 | |||
| 018-450 | 18 | 23.4 | 720 | 13.5 | 0.90 | |||
| 024-450 | 24 | 31.2 | 1280 | 18.0 | 1.20 | |||
| 048-450 | 48 | 52.8 | 5120 | 38.4 | 2.40 | |||
CAUTION:
1.The use of any coil voltage less than the rated coil voltage will compromise the operation of the relay.
2.Pickup and release voltage are for test purposes only and are not to be used as design criteria.
Characteristics
| Insulation Resistance | 100MΩ min (at 500VDC) | Item 4.11 of IEC 61810-7 |
| Dielectric Strength |
|
|
| Between Contacts | 50Hz 750V | Item 4.9 of IEC 61810-7 |
| Between Contact and Coil | 1C:50Hz 1500V;1A:50Hz 2500V | Item 4.9 of IEC 61810-7 |
| Shock Resistance | 98m/s² 11ms | Item 4.26 of IEC 61810-7 |
| Vibration Resistance | 10Hz~55Hz Double amplitude 1.5mm | Item 4.28 of IEC 61810-7 |
| Terminals Strength | 10N | Item 4.24 of IEC 61810-7 |
| Ambient Temperature | -40℃~85℃ | |
| Relative Humidity | 5% to 85% | Item 4.16 of IEC 61810-7 |
| Mass | 10g | Item 4.7 of IEC 61810-7 |
Safety Approvals
| Safety approval | UL&CUR | TüV | CQC |
| Load |
1A 16A/250VAC 1C 10A/250VAC |
16A/250VAC,14VDC | 16A/250VAC |
Dimensions(mm)
CAUTION
In case of no tolerance shown in outline dimension: outline dimension ≤1mm tolerance should be ±0.2mm outline dimension >1mm and ≤5mm, tolerance should be ±0.3mm; outline dimension >5mm, tolerance should be ±0.4mm.
